Licensed Concrete & Masonry in Red Bluff, CA
We found 8 active licensed concrete & masonry contractors serving Red Bluff, California, verified against official state licensing records.
Concrete & Masonry Contractors in Red Bluff, CA
Andre Olivan Concrete Construction
ActiveConcrete
License #1065040
P O BOX 518, 96080
Chivo's Concrete
ActiveConcrete
License #1094377
530 EL CERRITO, 96080
Custom Concrete
ActiveConcrete
License #838071
1645 TANBARK DRIVE, 96080
Jensen Concrete
ActiveConcrete
License #1126714
255 KAREL AVE, 96080
K Mattingly Concrete
ActiveConcrete
License #1153010
14405 MESA CT, 96080
Kupfer Concrete Construction
ActiveConcrete
License #1131031
450 JAMES AVE, 96080
Leroy Johnson Concrete
ActiveConcrete
License #716723
12115 PASKENTA ROAD, 96080
Stout Concrete Construction
ActiveConcrete
License #710149
691 PALMER DRIVE, 96080
Frequently Asked Questions
How long does concrete take to cure?▼
Concrete reaches initial set in 24 to 48 hours, can support foot traffic in 24 to 48 hours, vehicle traffic in 7 days, and reaches its design strength (typically 4,000 PSI) at 28 days. Full curing continues for months. Proper curing procedures during the first 7 days are critical for achieving maximum strength and durability.
How thick should a concrete driveway be?▼
Residential driveways should be a minimum of 4 inches thick for passenger vehicles. Heavy vehicle areas should be 5 to 6 inches. Commercial drives typically require 6 to 8 inches. Proper base preparation (4 to 8 inches of compacted gravel) is equally important as concrete thickness.
What causes concrete to crack?▼
Concrete cracks from shrinkage during curing, settlement of the base material, freeze-thaw cycles, excessive load, inadequate thickness, improper control joint placement, poor mix design, insufficient reinforcement, or tree root pressure. Some hairline shrinkage cracking is normal and expected.
What is stamped concrete?▼
Stamped concrete is decorative concrete that is imprinted with patterns while still wet to resemble brick, natural stone, slate, tile, or wood. It is more affordable than natural materials, requires less maintenance, and offers a wide range of color and pattern combinations. It should be sealed every 2 to 3 years to maintain its appearance.
How much does a concrete driveway cost?▼
A basic broom-finished concrete driveway typically costs $6 to $12 per square foot installed. Stamped concrete ranges from $12 to $20 per square foot. Exposed aggregate runs $10 to $18 per square foot. Costs vary based on thickness, site preparation, reinforcement, finish type, and regional labor rates.
Other Trades in Red Bluff, CA
Are You a Concrete & Masonry Contractor in Red Bluff?
Create a free profile on List a Service and get discovered by property owners searching for concrete & masonry services in Red Bluff, California.
Create Your Free Profile